RS1433

The RS1433 is a 16Bit, dual, high-speed, simultaneoussampling, analog-to-digital converters (ADCs) that support single-ended and pseudo-differential Inputs.

RS1432

The RS1432 is a 16Bit, dual, high-speed, simultaneoussampling, analog-to-digital converters (ADCs) that supports fully-differential Inputs. This device includes two individually programmable reference sources that can be used for system-level gain calibra

RS1430B

The RS1430B is a 16-bit, sampling, analog-to-digital (A/D) converter specified for a supply voltage range from 2.7V to 5.5V. It requires very little power, even when operating at the full data rate. At lower data rates, the high speed of the device enable

RS1430A

The RS1430A is a 16-bit analog-to-digital (A/D) converter specified for a supply voltage range from 2.7V to 5.5V. It requires very little power, even when operating at the full data rate. At lower data rates, the high speed of the device enables it to spe

RS1380

The RS1380 device is a full-featured, generalpurpose, 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7 V to 5.5 V supply and consumes just 134 µA of current at 3.6 V. The on-chip output amplifier allows r

RS1328

The RS1328 is a full-featured, general-purpose OCTAL 12-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7V to 5.5V supply and consumes 2.10mW at 3V and 4.55mW at 5V. The RS1328 is packaged in a 16 lead TSSOP package.

RS1324

The RS1324 device is a full-featured, generalpurpose, quad, 12bit, voltage-output, digital-to-analog converter(DAC) that can operate from a single 2.7V to 5.5V supply and consumes 2.5mW at 3V or 6mW at 5V. The RS1324 is packaged in MSOP10 package. The on-

RS1320

The RS1320 device is a full-featured, generalpurpose, 12-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7 V to 5.5 V supply and consumes just 325 µA of current at 3.6 V. The on-chip output amplifier allows

RS1300

The RS1300 device is a full-featured, generalpurpose, 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7 V to 5.5 V supply and consumes just 134 µA of current at 3.6 V. The on-chip output amplifier allows

RS555

RS925

RS9112C

Three different fan-out variations, 1:2 to 1:4, are available. All of the devices are pin-compatible to each other for easy handling.