RS29539

The RS29539 is a 24-pin device that provides 16 bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus protocol). The device can operate with a power supply voltage (VCC) range from 1.65 V to 5.5

RS29535

The RS29535 is a 24-pin device that provides 16 bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus or (SMBus) protocol. The device can operate with a power supply voltage ranging from 1.65 V to 5.5 V.

RS90LV049

1 FEATURES • Conforms to TIA/EIA-644 Standard • 400Mbps (200MHz) Switching Rates • 3.3V Power Supply • ±350mV Differential Signaling • Supports Input Failsafe Open, Short, and Terminated • Flow-Through Pinout Simplifies PCB Layout • Low Power D

RS90LV048

1 FEATURES • Conforms to TIA/EIA-644 Standard • 400Mbps (200MHz) Switching Rates • 100ps Differential Skew • 3.3V Power Supply • ±350mV Differential Signaling • Supports Input Failsafe Open, Short, and Terminated • Low Power Dissipation (52.8Mw

RS90LV047

1 FEATURES • Conforms to TIA/EIA-644 Standard • 400Mbps (200MHz) Switching Rates • 400ps Maximum Differential Skew • 1.7ns Maximum Propagation Delay • 3.3V Power Supply • ±350mV Differential Signaling • Low Power Dissipation (13mW at VCC=3.3V T

RS90LV012

RS90LV011

RS29617

The RS29617 is a BiCMOS dual bidirectional buffer intended for I2C bus and SMBus systems. The device provides bidirectional voltage-level translation (uptranslation and down-translation) between low voltages (down to 0.8V) and higher voltages (2.2V to 5.5

RS8T245A

RS8T245-Q1

RS74AVCH4T245

This 4-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port and B port are separately designed to track VCCA and VCCB, which accept any supply voltage from 1.2 V to 3.6 V. The RS74AVCH4T245 is optimized to operate

RS74AVC4T245

This 4-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage fro